Quote:
Originally Posted by solidsnake11
Sd blend stays at 0 I have the blend map set to all zeros
sd flags goes from 12 to 15
I only have the maf gs trigger set to 400 , 390
other trigger are zeroed
|
remove all the triggers
Just use SD blend zero all the triggers
see if it works no ral need for trigfers as the sd blend works of manifold pressure once it gets to positive pressure ie over 1 bar jusr set SD
the trigfers often work as a value and a hysterisis
eg the load trigger you set say 0.7 load with hysteresis of say 0.1
im guessing the maf g/s trigger some same way so if you set 400 and 390 its not going to work well