View Single Post
Old 07-16-2020, 08:37 PM   #6
solidsnake11
Senior Member
 
Join Date: Nov 2018
Drives: brz
Location: nc
Posts: 318
Thanks: 431
Thanked 739 Times in 443 Posts
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
I used the factory wrx oil pump that runs off the cam to pump oil through a oil cooler.
The factory wrx oil pump is a scavenge pump for the OEM turbo.
One of the aftermarket turbo kits for the brz comes with the wrx pump.

I also used a electric fuel pump for oil scavenging on my gsxr1000 turbo I built. Had to build a oil box below the turbo and run a breather to it. Without the breather the turbo would stop spinning at idle with the pump running. I figured it was sucking the turbo bearings dry which caused it to stop spinning.

Last edited by solidsnake11; 07-16-2020 at 08:48 PM.
solidsnake11 is offline   Reply With Quote
The Following User Says Thank You to solidsnake11 For This Useful Post:
DarkPira7e (07-16-2020)