Quote:
Originally Posted by nkobns
With the DT app, the ethanol content is perfecly steady, but I doubt refresh rate would capture the drops.
I checked my ground (between the black wire and my battery negative, it looks solid with a nice and steady 0 Ohm)
That is an interesting lead, I didn’t expect such a « safety » feature. I will check your topic.
My FFK could be ordered with a fuel pressure sensor option but I did not take it. Would that mean there’s no ‘feed pressure sensor’ at all ?
|
I did not see the drops on the app either. The only indication was the low feed pressure. If you do not have the pressure sensor, then this feature shouldn't be the cause of your issue. One other potential cause could be a bad wire crimp on the E% sensor connector.