View Single Post
Old 07-11-2020, 01:50 AM   #71416
NoHaveMSG
Senior Member
 
NoHaveMSG's Avatar
 
Join Date: Jan 2018
Drives: Crapcan
Location: Oregon
Posts: 11,603
Thanks: 18,883
Thanked 16,883 Times in 7,684 Posts
Mentioned: 112 Post(s)
Garage
Quote:
Originally Posted by Ultramaroon View Post
Even if they're ground down to the deepest groove on both sides?
I think groves gone completely both sides is worn. The picture is the driver side, passenger side was much worse and measured just outside of spec. I got 26.4mm on the driver, 25.8mm on the passenger side. Spec is 26mm min. New is 28mm. These were run for 2 1/2 years on track pads all the time. With the stock brake setup I was getting about 8 ish months and 4 track days out of pads, little longer then that out of the rotors. I think it was running track pads in cold weather that killed them quicker, I am going to start swapping to street pads from now on.
__________________
"Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde.
NoHaveMSG is offline  
The Following 2 Users Say Thank You to NoHaveMSG For This Useful Post:
humfrz (07-11-2020), Ultramaroon (07-12-2020)