View Single Post
Old 07-10-2020, 03:11 PM   #30
DarkSunrise
Senior Member
 
DarkSunrise's Avatar
 
Join Date: Apr 2012
Drives: 22 BRZ (Previously 13 FR-S)
Location: USA
Posts: 5,798
Thanks: 2,187
Thanked 4,243 Times in 2,221 Posts
Mentioned: 48 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by Mike_ZN6 View Post
Which lw flywheel did you use? Is it any louder than stock?

I want to do the mod when I replace my clutch, but I have read all lw flywheels cause really bad clutch chatter (especially with the A/C on) with these cars.
I used the Exedy stage 1 clutch kit that came with a lwfw (FF503, 12.7 lbs). I've heard it's been discontinued now.

I might have gotten really lucky, but so far with 150 miles on it, there been no chatter. My stock flywheel would sometimes make a marbles in a can rattle sound at idle with the ac on, but I haven't heard it at all with this setup. The only significant noise I hear is a cabin resonance on deceleration from 3500-2500 RPM in 5th gear. That might be caused by my whiteline diff cradle bushings though, as the sound seems to come from the rear and is similar to the sound they make, just amplified with the new flywheel. Other than that, this setup is very quiet.

I think what helps is the Exedy flywheel isn't too light and the clutch has inner springs to absorb shocks and vibrations (and is full-faced). It's also easy to drive. I'd highly recommend it (so far).
__________________
"Never run out of real estate, traction, and ideas at the same time."

2022 BRZ Build
2013 FR-S Build
DarkSunrise is offline   Reply With Quote
The Following User Says Thank You to DarkSunrise For This Useful Post:
Mike_ZN6 (07-10-2020)