Quote:
Originally Posted by DarkPira7e
Hopefully you realize that the mesh is only on the the part of the filter facing outwards, not on the engine side. That tiny thing he pointed at with pliers is on the gasket and wouldn't get sucked in. Even if it did, it wouldn't do anything.
Obviously it's not great that it slipped by QC thougg
|
There was some rubber molding tiny parts also all over i removed and one tiny wire mesh on the back was poking through the filter and that 2 I circle green i took pic before I took it out once i found that pot hole like chunk caught my eye so I had to look at it more closely. I was about to just put it in but that molding stopped me.
Yes as a mil spec quality worker this made my ocd tick bad 🤣🤣🤣 not going on my brz ts 2020 NOPE!!😂 I'm sure you wouldn't put this on your car also