Quote:
Originally Posted by CSG Mike
Preloading the spring effectively lowers the car, and extreme preload will slam the car.
|
When increasing the preload (without touching the lower mount / changing the damper length), the car surely gets higher, not lower.
Having minimal preload and setting up the desired ride height by changing the damper length contradicts the settings / dimensions recommended in the manual that comes with CSG FLAs.
And it is a good way to run into HBS all the time when driving on a highway — see the
discussion we had earlier on this thread.
Quote:
Originally Posted by CSG Mike
Why not run the car lower with recommended CSG FLA settings, on the default Wisefab drop? The geometry is already compensated for, and will make the car handle like butter. The may be super low, but aerodynamically, that's better anyways!
|
Isn't the car going to be way too low (2" + 1.4" lower than stock) and have essentially no compression travel available?
Quote:
Originally Posted by CSG Mike
... a long rear shock base mount ...
|
Are these available for purchase anywhere? Curious just in case I decide to get a RC kit myself.