Quote:
Originally Posted by CSG Mike
There's a mega setup issue if you have a 3/4" reverse rake. You may want to check your setup, as both the front and rear kits equally adjust the roll center of the car.
|
I only have the rear kit. The person I consulted at CSG recommended me a rear-only drop spindle kit when i was simply looking for spherical bushings and/or arms with spherical bushings
To get the front low enough, my front geometry is going to be absolutely whacked out
Quote:
|
REMOVE all of the preload on your rear. Preloading the spring effectively lowers the car, and extreme preload will slam the car.
|
That is literally the opposite of what increasing/decreasing preload did to my ride height.
Quote:
Why not run the car lower with recommended CSG FLA settings, on the default Wisefab drop? The geometry is already compensated for, and will make the car handle like butter. The may be super low, but aerodynamically, that's better anyways!
|
same as answer 1
I'm not going to respond to anything further. Hit me up on DM or let's just drop it