|
Some things I learned from doing this.
Brake clean will soften up the sealant and make it easier to remove with a brush.
Go buy 4 six inch long bolts, I believe the thread pattern for the timing cover is 8x1.25. Cut the hex off of them and round the ends. Then screw them to the motor. It will help guide the cover on. Makes it much easier if you are working by yourself.
I wrote the torque sequence of the timing cover on the cover with marker. There are two different torque specs since some of the bolts are 6mm. I used red marker for the 6mm, and black for the 8mm bolts.
__________________
"Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde.
|