Quote:
Originally Posted by Irace86.2.0
Cracks can happen, even on coated pipes. If you need to weld or get the cracks welded then how would someone weld a coated pipe? Unless the crack is at the end, sanding the inside of the pipe to remove the coating to get a proper weld is virtually impossible.
If the coating fails/chips then it could get sucked back into the combustion chamber. This can sometimes happen depending on the expansion differential between the coating and the metal.
This is worth a read. Just opinions, but it summarizes some concerns:
https://www.ferrarichat.com/forum/th...eaders.159356/
Opinions can vary. |
Damn you just opened a whole can of worms I didn't know existed. Thanks though for the insight. I'll be back after analysis paralysis wears off...