Quote:
Originally Posted by aznchris
Yep! The camera and the harness will work with just those things. At least it did for me in the FRS. It should be the same with the BRZ. There's going to be a red wire coming from the camera, you need to supply that with 12V. You can tap into pin 2 of the 28pin connector behind your head unit for 12V. You'll still need some way to tell your head unit that you're in reverse. I honestly forgot how I did this. I just remember tapping into a pink wire or something down by my left foot.
There's quite a few videos and threads on how to hook it all up. But those 2 things I sent you for sure you'll need. You might need some extra wire for that reverse signal.
|
Thanks again, I will try to see if the camera I bought can operate under 6v if not I will tap into 12v.