Quote:
Originally Posted by LimitedSlip
Something else I noticed: Did you run a new 12 volt power wire up to the battery (or elsewhere) for the Boss R1100M amp? The factory power wire for the trunk amp is only rated and fused to supply 15 amps at 12 volts. The specs for the Boss R1100M indicate that it requires a 30 amp circuit - twice what the factory circuit is rated for. This has nothing to do with the speaker issue but you may blow fuses or melt wiring depending upon how hard you drive the amplifier. Just sayin' . . .
|
@
Yes I did run a new power wire from the battery through the firewall to the back and it’s grounded on the strut bolt I believe.