Thanks to @
toast and @
devtec for the idea, I made a part today. I was initially going to make it out of Aluminum and try my hand at anodizing... still might (I have a 1.25" x 2" piece of bar stock) but I thought Nylon would be lighter easier to work with since I'm doing it by hand. I do have a cheapy Delta band saw and drill press so that helped. The holes for the in and out fittings could have been a bit straighter but tapping those holes by hand was rough.
Still waiting on the harnesses so I can make this plug and play, with this sensor measuring intake pressure and the Edelbrock stock sensor measuring IAT. Going to put it right inline with the bypass valve line. I should have it done in a week or so.