Quote:
Originally Posted by 86TOYO2k17
The resolution on that is so low i cant make out any of it.
|
Use a photo viewer and zoom. It's clear enough to tell it's not close to 10 psi at 3500 rpm.
Quote:
Originally Posted by 86TOYO2k17
But you would need a log showing RPM, Throttle Angle, and MAP pressure or boost pressure (assuming a properly scaled 2+bar map sensor)
|
The log does show RPM and MAP pressure. It's a run to redline so I can't imagine why it'd be at anything other than full throttle.
Quote:
Originally Posted by 86TOYO2k17
Not really, maybe only to you. Trying to read in or out what you want from other peoples posts, or completely disregarding entire sections of a post.
|
I'm not reading into anything. You said 10 psi at 3500 rpm on a PD kit and I think that needs some backup since my research and records, which was all done before I bought a PD charger myself, suggest otherwise.