Quote:
Originally Posted by humfrz
You might try the ol @ Ultramaroon grease um up the clutch fork trick:
Quick & dirty: from @ Ultramaroon
1. Detach the slave cylinder. Leave the hydraulics alone.
2. Remove the dust boot from the fork.
3. Reach down behind the fork with a finger and feel for the pivot. It's going to be tight because of the retaining clip.
4. Squeeze a decent glob of Lucas Red & Tacky #2 in there with your finger.
5. Jiggle the fork to distribute the grease as much as possible. It'll work in more on its own.
6. Put a dab of grease in the top pivot where the slave pin goes.
7. Reassemble. |
This or grease up the main and slave cylinder shafts. That s usually more of a honk than a squeak though.