Quote:
Originally Posted by thomasmryan
yes, the upper bolt is the adjustment. counter the bolt and loosen the nut. always.
it is best to use a 6 point socket and an impact quality will withstand higher loads.
the box stores will have 3/4" drive parts individually and you still might need to throw a pipe on the handle to extend it. (19mm is close enough to a 3/4" socket.)
I break all my bosses harbor freight tools for fun because its junk.
|
Ran over to autozone and bought a 2ft 1/2 in drive breaker with a new 19mm deep socket. Got the top out on drivers side. Working on bottom now.
😂 I’ll be changing all the hardware. I’ve never had this much trouble before. I guess I wasted all my luck on my old Miata where everything came apart with much ease.