He's asking if the NA oil cooler is supposed to come with hardware....
@
jmai this is a link to the installation manual.
https://jacksonracing.com/pdf/instru...anual_rev2.pdf
The bottom of page 2 states
Quote:
Part Numbers will be listed throughout the installation instructions in parentheses.
(1234-56-789) or (12345-67890)
|
An example is in the middle of page 8.
Quote:
22. On the driver side of the front bumper support you will find an open mounting hole with no
threads that is approximately 23” from the stud mounting location. Reach in through the opening
in the front bumper support and install a M6x1.0x25mm flanged bolt (91100-06025) with a M6
fender washer down through this mounting hole
|
So yes, I would assume this unit came with hardware.