Quote:
Originally Posted by LukasD94
I am not by any means a mechanic/programmer, but if I understand correctly you are saying that there is a way to show to the ECU that everything is fine mechanically with the car and it should not pop-up the error code?
|
Well, yes and no. I've considered cobbling together a device to trick the servo circuit but it would only work for a specific engine speed. Maybe an arduino-based device could make a delay line as a function of input frequency blah blah blah... That would trick the ok flag but that bank would run like shit and I have no idea how quickly the delay could be dialed out as the ECU relearns, or if it would just immediately throw some other code. I've done something like that in the past but it was a completely analog device for a fixed frequency. Totally pulling the idea out of my ass.