Quote:
Originally Posted by steve99
yes tactrix works with techstream
can you post up the ecuflash log when car fails to connect
check battery volts are at least 12V
Tactrix does have thin pins, try bending both rows of pins inwards slightly so it makes better contact with obd sockets.
2013 and earlier cars were known to have obd socket issues
If the tactrix was reading vin and ecu calid then saying comms fault it might be because ecu has be locked by another tune system like ecutek or brzedit
|
I can't share them as i didn't save anything. With no connection I assumed there was nothing to save
The battery was fully charged and monitored during relearn and other operations. Volts never dropped below 12.4
Have you written a post on how to save the files and post them.
I struggle with some of this because some of this is new to me. I am struggling with some of the language and abbreviations.
Thanks