Quote:
Originally Posted by JIM THEO
LHD in Greece as you, in my case the overpipe rubs against the subframe when I start from a stop, on hard acceleration and left corners.
As handmade product every header is different as every BRZ/FRS is different, I think the rest of the exhaust plays a role and adds to the rubbing issue, although the only exhaust part I added is a Berk frontpipe.
|
forgot they are all handmade but i have type B so slightly less "handmade"
I have read some people having issues with certain frontpipes if they are either heavier, angled lower then stock, or installed lower, causing the overpipe to "droop" lower and hit. possibly something to look into. or see if you can reinstall frontpipe and bolt it to FP mount to have it higher and pushing overpipe up more. maybe pull catback in closer to "wedge" the FP up more.