Quote:
Originally Posted by AugyIA
Thanks, that makes sense. Is there someplace within the engine bay to use for a switched circuit or am I better re-routing it to the interior fuse panel?
|
there might be, you'd have to test it. i know there's going to be a point on the interior fuse block though.
Quote:
Originally Posted by AugyIA
I am assuming we are both referring to the Yellow wire from the switch (per my diagram). In the engine bay, it's spliced onto a red wire with a spade terminal (the one that is unconnected and resting along the left fender).
Appreciate the help!
|
yes. and i don't understand why they choose to run it to that location, or put the spade terminal on it. none of it makes much sense.