Quote:
Originally Posted by soundman98
1: buy the 3m vhb tape locally. amazon should be ok, but i learned the hard way, it's such desirable tape that many vendors stock counterfeit-and-inferior double sided tapes without even knowing it. and you won't know the difference until it decides to spontaneously stop hitchhiking on your car.
2: use the 3/4-1" tape.
3: if the bolts are there, i would use them. if you don't want the bolts, get a replica off ebay. my trd-style duck tail was something like $89 pre-painted. all i had to do was apply the tape and stick it on.
|
Hey Thanks!
1. I already have it and tested on other parts, so far so good at 80mph.
2. I'll double up on the sizing.
3. Would the bolts fit into the BRZ holes? I'm pretty sure they don't but not confident.
Would you take off the Toyota weather stripping the 3M that? Most of it is 3M+Weather Stripping combined.