View Single Post
Old 03-20-2020, 01:32 PM   #4
mrhayes1
Member
 
Join Date: Apr 2019
Drives: 2013 Scion FRS white
Location: Phoenix, Arizona
Posts: 76
Thanks: 0
Thanked 22 Times in 15 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Garage
I replaced all 4 dash speakers with normal 2-way speakers. The mids are 3.5 kickers. The tweeters are 1 inch Rockford Fosgate I think. Connections were crimped. You are mentioning OEM to aftermarket connections, however, I am not aware of any that exist or I would have bought them. All I did was add the 4 speakers. I did not add crossovers, but I did reuse the white factory connector that is attached to the tweeter (that may be a factory crossover, I don't know).

I believe the FRS has ONLY 2 wires running from the factory amp to the dash (one + and one -). That powers tweeter and then there are 2 wires that then run from the tweeter and power the mid. There are not 4 wires (2+ and 2-) running up to the dash....Essentailly you have only 2 speaker wires (+ and -) that are powering 2 speakers.

I am not trying to sound ungrateful or smartass, but if you have not replaced the dash speakers in this car like this you probably wont understand what I am talking about as the OEM speakers are wired like crap. If you replaced your dash speakers with the factory Toyota upgraded system you will probably not know what I am talking about because it would have come with connections for everything.
mrhayes1 is offline   Reply With Quote