Quote:
Originally Posted by 1quickchic
had to put a new ecm in, orig ecm coding came as a00c the new ecm when connected to the oft identified as a01c so I am assuming this would now be correct. I cant see how its scaled for 700 as in romraider it doesn't show anything that says 700 usually it reads out and can be edited but the rom is all weird such as the maf scale table as well.  would Toyota be able to update the car to say something readable like b01c? or later? the injectors are new as is the ecm so idk or understand a hardware issue |
If the tavles in romraider look weird or incorrect, strange numbers symbols or strange axis on tables then you definitin is incorrect and not matched to the rom your editing.
Romraider looks at the calid at 8000 hex in any rom and just gries to match that. Its very easily confused by oft rom calid changes. Editing a rom with incorrect definition will at best cause unusuall wngine behaviour and can also get the ecu into a locked up state
Each time you flash a rom its a complelty new rom. The old one is erased first.
From what your sating i think you problems are matching definions to your calid adjusted roms