Quote:
Originally Posted by 1quickchic
I am aware of this, but even if is the case using oft tunes, what's the deal with being unable to make any sense of the original file or it running weird on the new ecm with codes p062d and p1235 popping in ? this throwing me off every single car I have tuned has never been like this, it seems straight bonkers
yes this is a new OEM ecm from Toyota, what's also weird is using a matco scan tool, it wont accept a new vin either so idk wtf is going on at this point, the oft did however pull the base even with no vin  |
Ok had a look at the roms the oft turbo SC A01C is a genuine A01C so you need to use a romraider genunine A01C definition
This rom appears to be set up for a fairly low boost turbo or SC like 8psi, im guessing, judfing by srock injector scaling and the pi\di tables
The other mod A01C is rearly a B01C rom made to look like an A01C
Also it way incomplete as far a setting up for a turbo is concerbed load limits are not set ,its got 700 cc jnjectors scaled but pi\di ratios dont suit
Fuel tables not rescaled for load
Load will truncate at 1.7 likely not enough maf flow limit too low
Seriously dont use that ot your likely to blow stuff up
The two cel codes your getting appear to be hardware issues
If your trying to use either of those roms with an oft married to an A00C car it wont lad as oft wants to see a rom that looks like an A00C