Quote:
Originally Posted by D-VO
@ DarkPira7e I'm getting no misfire codes. Mine are all still enabled except for the rear O2 and MAP sensor SES because I'm using an OMNI 4 BAR MAP sensor.
@ steve99 How can I test the MAP sensor? I'm logging the boost level with the MAP and it's still climbing as it did in previous logs. The only datalog line that I see changing is the timing; it drops by 1 - 2 degrees during the misfire and AFR's start going up to a maximum of 12.8. It almost feels like its hitting a rev limiter. |
Maybe test it against another manifold pressure guage.
Also make sure it reads close to 14psi or 1 bar with engine off igniiton on