Quote:
Originally Posted by APEX Race Parts
CALLING ALL BRZ PERFORMANCE PACKAGE OWNERS IN THE BOSTON, MA AREA
In an effort to expand our wheel offering, we are actively looking for a BRZ Performance Package model with the stock Brembo brakes and Sachs struts still in place to conduct 3D scanning. If you or a fellow enthusiast you know is available, please contact us by PM, email or phone. Scanning can be done at your convenience, Monday - Sunday, and can also be done at your location. I know many of you have stored the car for the winter, so we want to make this as convenient as possible for the owner.
This is a vital step to ensure our new flow formed and fully forged fitments and designs for this community are optimized for this chassis, and we greatly appreciate the support from the community in bringing this to market.
|
I don't know if it's too late in your development process, but for 17x9 fitments there be different offsets? The ARC-8 17x9 et42 is very close to the stock front struts when using 245/40/17 Continental tires.
In my case, camber plates were necessary to get any negative camber up front on RCE yellow springs.