Quote:
Originally Posted by demariners
|
Quote:
Originally Posted by demariners
I did not use a 2017 clockspring. I used the existing clockspring from my 2015 and re pinned it.
|
Question for you on this. I am currently looking at retro fitting a 2017+ cluster and would like to make the buttons for controlling that as well as the audio controls work. I was planning on using a 2013-2016 Roll Connector, problem is, the connector on the steering wheel only has 10 pins and I need 11 for this. One thought I had was running the extra pin or more than 1 pin through the 4 pin connector for the paddles for automatic cars. Do know think this would be doable? Any reason in particular I wouldn't be able to use those pins?