|
a hint is that vvt exhaust reached negative values
Exhaust cams aren't allowed to go advanced past 0 so that is a false logging, so I also think is the cam angle sensor
Also cheap to buy, but be aware it needs a really careness to install because the distance must be corrected with special gaskets if needed, to have around 1.3mm of distance between the sensor and the cam plate
Otherwise you can induce misfires, there is a TSB explaining very well this
I mean, just install it, but if you get cel and misfire at least you know why
Last edited by tomm.brz; 02-01-2020 at 04:53 PM.
|