|
My next line of attack was to ohm the sensors out to confirm they were working. I unfortunately don't have a big direction scanner that can read and codes so I can't directly determine which sensor it is. But oddly enough clearing the code does absolutely nothing. I have torque pro and it will read and delete the codes, but the issue will still persist. Once I clear the code through the app the engine will go back to normal and the cooling fans will cut off for 3-5 seconds and then the engine light will comes back on, the engine will idle in limp mode and the fans will turn back on. It will give me the same code on torque pro as it does on my other obd2 scanner. P2158 circuit b. I'm assuming it's one of the front sensors, from the pure assumption that the 4 sensors are labeled a,b,c,d whre a and b are the front and c and d are the back sensors. Pure guesswork though. I'm just curious if anyone has had a similar code and what their remedy for it was but I've found nothing online that corresponds with my current issue so it's just more troubleshooting for the time being. I appreciate all the help again and thanks for your assistance.
|