View Single Post
Old 01-21-2020, 10:25 AM   #36
Racecomp Engineering
 
Join Date: Nov 2011
Drives: 2016 BRZ, 2012 Paris Di2 & 2018 STI
Location: Severn, MD
Posts: 5,520
Thanks: 3,542
Thanked 7,416 Times in 3,034 Posts
Mentioned: 311 Post(s)
Tagged: 9 Thread(s)
Send a message via AIM to Racecomp Engineering
Quote:
Originally Posted by Petah78 View Post
Sorry to digress it I do have a couple of questions:

1. Can you use the stock top mounts with the B14?
2. What tophat/spring options would there be available for the B14 if you choose to upgrade to a higher rate later on?
3. How does the B6/RCE yellow combo compare to the B14 system?

Thanks.
1. Yes. They're designed to use stock top hats.

2. If converting to linear springs, you'll need new upper spring perches. Most camber plates will work then (but you'll need to make sure).

3. B6/RCE Yellow vs B14...the B14 will allow you to go a little lower and still work. Slightly firmer spring rates on the standard B14 so likely a little better on the track. B6 combo is simple, easy, fun. Not as low or stiff, but they work well on the street and track with appropriate tires.

- Andrew
Racecomp Engineering is offline   Reply With Quote