Quote:
Originally Posted by 86driftcar
Hello all, Im not sure if this topic has been covered, it probably has but I cant find anything. I'm Supercharged with ECUTEK and my launch control is not working properly. I press clutch all the way down, go from neutral to 1st gear, hammer the gas and it revs up to designated RPM but then it just drops all the way down. The needle doesnt stay consistantly reving at the rev limiter.
Is this a software problem or did my tuner miss something?
|
From my understanding, you need to be fully stationary as LC doesn’t work if your rolling at 6+mph (although mph limit varies depending on LC settings). In first gear press clutch in 100% press throttle 100% it should rev up to and hold revs at LC rev limit. then quickly dump the clutch 100%. If it still doesn’t work when doing all this. It may be tune related and LC settings need changing.