Quote:
Originally Posted by JesseG
So just be careful getting the old sealant removed, and apply enough for a good seal with the new plate? Is there a specific tool that is best to scrape the old stuff off? I have some putty knives that might work. [emoji1]
And if you put yours up for sale let me know. [emoji106]
Sent from my iPhone using Tapatalk
|
I used a blunt nylon trim panel tool to get ALL the old sealant off. Got everything off without any nicks.
I'm using the Verus plate which uses an o-ring to seal. It's a little more critical that you remove all sealant in the groove since that's where the o-ring sits. You probably wouldn't need to be so thorough if you're going back with stock plate and sealant..