We developed this fix out of necessity as the OE and other aftermarket side markers almost never stay on once they have been removed. The issue spawns from the "A-Clips" which are loosened and do not stay as tight upon removal.
We fixed this issue by creating a carbon side marker replacement that
*bolts* into the bumper in 3 locations. The bolts and nuts do not back out or loosen over time.
For the first time in over a year, we actually have some units on the shelf so we decided to start a thread explaining the kit and hopefully educating some people on the part. The overall response from the community has been very positive.
Let us know if you have any questions. We have an install video here:
Thanks,
Eric