Quote:
Originally Posted by venturaII
the lower control arm is essentially a two force arm and only needs a radial rating, really. The axial load is handled by the toe arm.
|
A two-force member is a tension/compression link only, which would be purely axial loading.
Not sure what you're saying here.
Quote:
Originally Posted by venturaII
Nope. That is a rod end. Possibly made by Heim, or one of a bunch of other manufacturers. Aurora doesn't sell Heim joints, they sell spherical rod ends.
|
....?
Funniest part is I had no idea what a heim joint was until I searched it. Upon which the results were pretty much 100% what was supplied earlier as a heim joint.