Quote:
Originally Posted by Pizzachicken
Ah okay, did you have any trick to getting the wires through the door grommet then? I tried all last night and couldn't seem to get it. Did you remove both grommets and the white plastic piece by the kick panel?
|
Those door grommets are a PITA. I put turn signals in my side mirrors and did it the lazy way and just shoved them to the side. Well, enough closing and opening the doors it cut the wire. So I did it the right way finally.
Need to remove the black tape on the grommet (between the door and fender). Slide the top grommet into the door itself (I think I used some grease here but not a whole lot). Compress the grommet, then slide wire through.
Once you get the wire through, slide a coat hanger into the bottom of the grommet near the kick panel and then pull it into the car. Slide top part back to meet the bottom part and tape back up.