Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Dealer replaced ECU, now OFT won't work, any ideas??

Windycity · 12-08-2019, 04:37 PM

Thanks guys, I did flash the ECU back to stock before this whole thing started. I emailed Open Flash, and they said "

You'll need to flash the ORIGNAL file, back to the ORIGINAL ECU (after re-installing it).

Then, erase your OFT, install your new ECU again, and install the OFT onto the car once again."

I'm going to try erasing the OFT as they suggested, then try and see. If not then I'll try the Tactrix.

I did contact Toyota Corporate, and they supposedly will reimburse me $750 but I had to pay the whole thing first.

Still it should never have even happened....

12-08-2019, 04:37 PM	#7
Windycity Member Join Date: Apr 2016 Drives: 2013 Scion frs Location: Chicago Posts: 55 Thanks: 1 Thanked 9 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks guys, I did flash the ECU back to stock before this whole thing started. I emailed Open Flash, and they said " You'll need to flash the ORIGNAL file, back to the ORIGINAL ECU (after re-installing it). Then, erase your OFT, install your new ECU again, and install the OFT onto the car once again." I'm going to try erasing the OFT as they suggested, then try and see. If not then I'll try the Tactrix. I did contact Toyota Corporate, and they supposedly will reimburse me $750 but I had to pay the whole thing first. Still it should never have even happened....