Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - FIXED: Installed Edelbrock SC. Now car is throwing CELs

localhost · 11-27-2019, 08:15 PM

I cleaned the MAF sensor, reset the CELs and went for a drive. Didn't look like it fixed anything though. CEL isn't on yet, but I'm sure it'll come back within the next day. Fuel trims are still whack - ~13.3% at idle, but jumps up to nearly 40% with even the slightest throttle. Probably goes to 0 above 4500rpm but with a boatload of snow on the ground, testing that isn't the easiest.

Edit: jiggling the wires and tapping lightly on the sensor itself didn't do anything. So at least the electrical connections seem solid.

11-27-2019, 08:15 PM	#41
localhost Member Join Date: Jun 2018 Drives: Edelbrock SC 2015 FR-S 6MT Location: Calgary, AB Posts: 67 Thanks: 18 Thanked 25 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I cleaned the MAF sensor, reset the CELs and went for a drive. Didn't look like it fixed anything though. CEL isn't on yet, but I'm sure it'll come back within the next day. Fuel trims are still whack - ~13.3% at idle, but jumps up to nearly 40% with even the slightest throttle. Probably goes to 0 above 4500rpm but with a boatload of snow on the ground, testing that isn't the easiest. Edit: jiggling the wires and tapping lightly on the sensor itself didn't do anything. So at least the electrical connections seem solid. Last edited by localhost; 11-27-2019 at 09:16 PM.