|
The first pic is the bypass valve hose. If the valve does not move from the open position (pulled in due to vacuum) when you pinch the hose, then it is working correctly and not leaking.
As for not having a clamp on the PCV hose, I would put one on, but I think it was a pretty snug fit so I doubt if that's your issue.
You also need to look at the other end of these 3 hoses to make sure they are still connected, especially at the evap Solenoid (known to pop off from there), so from the SC nose to the evap solenoid and from the evap solenoid to the hard line.
|