Quote:
Originally Posted by littlealex
hello everyone, i just got a set of tein flex z for my frs
just wondering will i need aftermarket rear lower control arms and camber bolts to adjust camber and toe if i lower it around 1.25"?
|
Flex Z have camber plates in the front. So, camber bolts are not needed, but can work in conjunction. (I have both) Also, you don't
need LCA, but if your natural camber is different on each side, you may want them. (mine was -1.8 LEFT and -2.2 RIGHT after lowering 1" - I have them now and my rear camber is the same on each side)