|
All replies appreciated.
Glad to know these are sold under Spec-D; at least I recognize that name.
The D2S bulbs I see are HID; would I have to rewire for those?
I'd love to just put new bulbs in, but I fear the wiring is jacked up / wrong. Most of the hi/lo combo bulbs I see have three wires going to them; I only have two. And, the wire which goes to the parking lights in the front is tapped in to one of these. (twist and tape).
What should the voltage output be for the two wires (per light) I have, if they are correct? The lights so dim, I'll be happily surprised if the voltage is even close. There is almost no difference between low and high beams, and very little output in general.
If only two wires is OK, and if the voltage is close, I'll make some bulbs work.
Very much appreciated.
Alan
|