Quote:
Originally Posted by kmbkk
I ran my wiring through the door using a 3 ft long zip tie. I disconnected both ends of the grommet from the door and body. I then Sprayed the zip tie with silicone lubricant and ran it through the grommet from inside the cab. I taped the end of the speaker wire to the zip tie and pulled it through the grommet and into the door. Easy peasy!
|
I didn't think of using that. I was using the wire snake that crutchfield sent. Which is basically a longer and much thicker zip tie. I'll try a long zip tie next.
Sent from my iPhone using Tapatalk