Quote:
Originally Posted by TylerLieberman
Very nice!
Also a fun fact- it can be done without removing the outer tie rod from the knuckle. Unthread the inner from the outer tie rod first, then remove inner tie rod from steering rack. Then transfer the boot over and install the new inner tie rod to the rack, then screw the inner tie rod into the outer rod end. Done.
That's the way I did it. Either way works though. I just didn't have a ball joint separator lol
|
Thanks, I used your method without removing the outer tie rod and it worked great!
I also found another fun fact, if you turn the steering wheel full lock each way it pushes the inner rod out and makes removing the inner rod easy with the use of a spanner, no tie rod removal tool required!
