Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

jhalagian · 11-07-2019, 02:57 AM

Recently installed RCE Yellows along with Whiteline Upper Control Arm bushings. After install the Rears were sitting at -2.8/-3.1. The tuner shop was able to dial it back to -1.7/-1.8. As this is my DD is like to get the rear back to -1.0 or as close as possible. I wanted to see what the best course of action would be.

Not sure if there are any other bushings I could get to help or if I need an LCA. Appreciate the feed.

Sent from my iPhone using Tapatalk

11-07-2019, 02:57 AM	#1
jhalagian Member Join Date: Apr 2018 Drives: 2015 brz Location: Ontario Posts: 30 Thanks: 18 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Rear Camber RCE Yellow Recently installed RCE Yellows along with Whiteline Upper Control Arm bushings. After install the Rears were sitting at -2.8/-3.1. The tuner shop was able to dial it back to -1.7/-1.8. As this is my DD is like to get the rear back to -1.0 or as close as possible. I wanted to see what the best course of action would be. Not sure if there are any other bushings I could get to help or if I need an LCA. Appreciate the feed. Sent from my iPhone using Tapatalk