Quote:
Originally Posted by Tristor
WD-40 is primarily a solvent, not a lubricant. It can temporarily stop squeaks but an aerosol fluid film like Corrosion-X or similar is a much better bet. If you can, use a grease gun and suspension grease like AMSOil Dominator Racing Lube and grease your bushings under pressure.
|
Correct but it works and doesn't attract a shit ton of dirt. Not as bad as oils or grease. Fluid film is fantastic but makes a mess...Ohlins actually specs WD40 in their manual.
Here you can read up on WD40 myths
https://www.wd40.com/myths-legends-fun-facts/