Quote:
Originally Posted by LegendSingleton
I bought these rays online and the site I got them from said they’d fit a stock frs. I took them to a tire shop and they set one of the rims on the hub and it stuck out Pretty badly and was touching the spring perch. I don’t wanna return them so I wanna know what mods do I need to do if I wanted to achieve no poking or rubbing. Please help thank you, Rays Gram Lights 57xtc 18x9.5 +38
|
Are you lowered? Those wheels should
just fit with out touching the spring perch. A 18x9.5" +38 wheel, When on stock suspension, normally fits with a 235/40/18 without rubbing.
First, I would try a couple 3mm slip-on style spacers. (just on the front) The rear will be fine. This should make them not hit the spring perch.
If not, then I would either get extended studs+ thicker spacers for the front or a set of coilovers. (depending on your budget) With coils, you can fit a 255/35/18 all around.