Thought that I would post an update. All turbo components were installed over the weekend, but I discovered I had the wrong MAP sensor, so I've ordered one and it's on the way. Radium catch cans are also on the way and should be here this week. I still need to cut up the stock crash bar to fit it over the fmic. I also discovered that the vacuum hose on the intake pipe is touching the oil fitting on the oil pedestal sandwich plate. I'll need to source a longer hose with a formed 90 bend to avoid any issues. I replaced the serpentine belt since I had to remove the AC compressor to gain access to some hoses underneath the intake manifold (this was pretty painful).
Once I have all the parts installed, I just need to fill up the engine oil, prime the turbo, and submit idle and cruising logs to Zach @ CSG. I'll then jack the car back up and do a full inspection on the modified components and fix any issues that arises. Hopefully over a few months of street driving, any issues would be sorted out and I can do a shakedown on a small track next season.
I've learned a ton putting this kit together so if anyone has any questions I'll try my best to answer them!
1. ForceFed Racing got my oil pan welded up
2. Greddy oil pan baffle installed
3. Greddy turbo installed
