Quote:
Originally Posted by hxt_BRZ
So I recently did some work on my car:
ACT XT Street clutch w/ Street-light flywheel
Verus Engineering Clutch Fork
Verus Engineering Clutch fork Pivot
Followed all instructions in the DIY clutch replacement thread to the tea. Still after about 4k and above RPM, no matter the gear I'm getting this grinding/rubbing noise, not really sure how to describe it, video is linked below with audio.
Video:
Symptoms:
- Audible grinding noise coming from the footwell
- Clutch pedal has no pressure first half of travel, only starts to feel normal at about 3/4 depression
Car still shifts smooth, no issues there. Noise and pedal feel only occur after 4k rpm and sometimes doesn't start until higher (4.5-5k). |
Welcome to the forum, there hxt_BRZ -
So, you did the clutch work yourself? If not, I'd suggest you take it back to whoever did it.
You did replace the TOB - right?
If you did the clutch work yourself, I'd suggest you bleed the clutch system (again) and if that don't hep it, adjust the clutch.
That's all I got.
I'm going to refer you to our clutch expert, ol @
Ultramaroon , just to piss him off for bugging him on his day off -
I hope you get it sorted out.
humfrz