|
One more question. What about spacers like 7mm to 12mm? These are not thick enough to be made bolt-on type. They are also too thick as a slip-on. Extended studs can help. But there won't be enough hub left to make it hub centric for the wheel. For spacers thicker than 10mm, it seems possible that a lip can be matched. But then the slip can only be used to center the wheel literally. They cannot help to bear any weight. So the slip-on spacers more than 3mm (or 5mm, need to leave 6-8 turns on lug studs for the lug nuts) seems to be in a very awkward position.
|