|
You need to get an ATEQ QuickSet or a similar tool that allows you to program the TPMS Sensor IDs directly into the car via OBD2. Unlike other cars, you cannot use a scan tool to trigger a TPMS relearn and go on your merry way, you must explicitly program the sensor IDs.
The sensor IDs are on the valve stems on a sticker or you need a TPMS activator/reader tool to get them. I use an Autel MaxiTPMS TS408
The process itself is very simple, although the software from ATEQ was obviously written by paint huffing crayon eaters.
1. Get the Sensor IDs and positions (RF, LF, RR, LR)
2. Read current sensor IDs from car into ATEQ QuickSet
3. Program new sensor IDs into secondary slot on ATEQ QuickSet over USB using a Windows PC
4. Program new sensor IDs into the car using the ATEQ QuickSet
5. Drive with new TPMS sensors to verify light shuts off.
|